JVC GR-D47 Instruction Manual

Wipe Or Fader Effects, Program AE With Special Effects

Wipe Or Fader Effects, Program AE With Special Effects

FEATURES FOR RECORDING
ADV
A
N
C
ED
 F
E
A
T
UR
ES
EN
 19
MasterPage: Advan_Right
  
IMPORTANT:
Some Wipe/Fader Effects cannot be used with certain modes 
of Program AE with special effects. (See the right column.) If 
an unusable Wipe/Fader Effect is selected, its indicator blinks 
in blue or goes out.
These effects let you make pro-style scene transitions. 
Use them to spice up the transition from one scene to the 
next.
Wipe or Fader works when video recording is started or 
stopped.
1
Set the Power Switch to “M” while pressing down the 
Lock Button located on the switch.
2
Open the LCD monitor fully. (
੬ pg. 10)
3
Set “v” to the desired mode. (
੬ pg. 14)
● The WIPE/FADER menu disappears and the effect is 
reserved.
● The selected effect indicator appears.
4
Press the Recording Start/Stop Button to activate the 
Fade-in/out or Wipe-in/out.
To deactivate the selected effect
Select “OFF” in step 
3. The effect indicator disappears.
NOTE:
You can extend the length of a Wipe or Fader by pressing and 
holding the Recording Start/Stop Button.
WIPE/FADER
OFF: Disables the function. (Factory-preset)
 FADER–WHITE: Fade in or out with a white 
screen. 
 FADER–BLACK: Fade in or out with a black 
screen.
 FADER–B.W: Fade in to a colour screen from a 
black and white screen, or fade out from colour to black 
and white.
 WIPE–CORNER: Wipe in on a black screen from 
the upper right to the lower left corner, or wipe out from 
lower left to upper right, leaving a black screen.
 WIPE–WINDOW: The scene starts in the centre of 
a black screen and wipes in toward the corners, or 
comes in from the corners, gradually wiping out to the 
centre.
 WIPE–SLIDE: Wipe in from right to left, or wipe out 
from left to right.
 WIPE–DOOR: Wipe in as the two halves of a black 
screen open to the left and right, revealing the scene, or 
wipe out and the black screen reappears from left and 
right to cover the scene.
 WIPE–SCROLL: The scene wipes in from the 
bottom to the top of a black screen, or wipes out from top 
to bottom, leaving a black screen.
 WIPE–SHUTTER: Wipe in from the centre of a 
black screen toward the top and bottom, or wipe out from 
the top and bottom toward the centre leaving a black 
screen.
IMPORTANT:
Some modes of Program AE with special effects cannot be 
used with certain Wipe/Fader effects. (See the left column.) If 
an unusable mode is selected, the indicator of Program AE 
with Special Effects blinks or goes out.
1
Set the Power Switch to “M” while pressing down the 
Lock Button located on the switch.
2
Open the LCD monitor fully. (
੬ pg. 10)
3
Set “r” to the desired mode. (
੬ pg. 14)
● The PROGRAM AE menu disappears and the selected 
effect is activated.
● The selected effect indicator appears.
To deactivate the selected effect
Select “OFF” in step 
3. The effect indicator disappears.
NOTES:
● Program AE with special effects can be changed during 
recording or during Record-Standby.
● Some modes of Program AE with special effects cannot be 
used during Night-Scope.
PROGRAM AE
OFF: Disables the function. (Factory-preset)
 SHUTTER 1/50: The shutter speed is fixed at 1/
50th of a second. Black bands that usually appear when 
shooting a TV screen become narrower. 
 SHUTTER 1/120: The shutter speed is fixed at 1/
120th of a second. The flickering that occurs when 
shooting under a fluorescent light or mercury-vapour 
lamp is reduced.
 SPORTS
(Variable Shutter Speed: 1/250 – 1/4000)
This setting allows fast-moving images to be captured 
one frame at a time, for vivid, stable slow-motion 
playback. The faster the shutter speed, the darker the 
picture becomes. Use the shutter function under good 
lighting conditions.
Wipe Or Fader Effects
Lock Button
SNAPSHOT
Power Switch
MMENU/VOL.
Program AE With Special Effects
GR-D47AG.book  Page 19  Thursday, January 27, 2005  4:40 PM