JVC GR-D47 Instruction Manual

Playback Menus

Playback Menus

MENUS FOR DETAILED ADJUSTMENT
ADV
A
N
C
ED
 F
EA
T
UR
ES
EN
 17
MasterPage: Advan_Right
VIDEO
[  ] = Factory-preset 
SOUND MODE and NARRATION
During tape playback, the camcorder detects the sound 
mode in which the recording was made, and plays the 
sound back. Select the type of sound to accompany your 
playback picture. According to the menu access 
explanation on page 14, select “SOUND MODE” or 
“NARRATION” from the Menu Screen and set it to the 
desired parameter. 
[STEREO ]: Sound is output on both “L” and “R” 
channels in stereo.
SOUND L 
: Sound from the “L” channel is output.
SOUND R 
: Sound from the “R” channel is output. 
[OFF]: Original sound is output on both “L” and “R” 
channels in stereo.
ON: Dubbed sound is output on both “L” and “R” 
channels in stereo.
MIX: Original and dubbed sounds are combined and 
output in stereo on both “L” and “R” channels.
NOTES:
● The “SOUND MODE” setting is available for both 12-bit and 
16-bit sound. (In previous models’ functions, “12-bit” is 
called “32 kHz” and “16-bit” is called “48 kHz”.)
● The camcorder cannot detect the sound mode in which the 
recording was made during fast-forward or rewind. During 
playback the sound mode is displayed in the upper left 
corner.
Allows you to set the video recording mode (SP or LP) 
depending on your preference. It is recommended you 
use “REC MODE” in VIDEO Menu when using this 
camcorder as a recorder during dubbing. (
੬ pg. 25)
NOTE:
“REC MODE” can be set when the Power Switch is set to 
“PLAY” or “M”.
SYSTEM
Each setting is linked with “s”, which appears when the 
Power Switch is set to “M”. (
੬ pg. 14)
● The parameters are the same as in the description on 
page 16.
[  ] = Factory-preset                  
VIDEO DISPLAY
The “n” (VIDEO DISPLAY) settings are effective only for 
video playback except “BRIGHT”.
● The parameters (except “OFF” in ON SCREEN settings) 
are the same as in the description on page 16.
[  ] = Factory-preset 
੬ pg. 9, “Brightness Adjustment Of The Display”  
When set to “OFF”, the camcorder’s display disappears. 
When set to “AUTO”, the date/time are displayed in the 
following cases:
● When playback starts. The camcorder displays the date/
time when scenes are recorded.
● When the date is changed during playback.
Playback Menus
SOUND MODE
NARRATION
REC MODE
[SP] / LP
BEEP
OFF / BEEP / [MELODY]
REMOTE
OFF / [ON]
DEMO MODE
OFF / [ON]
PRIORITY
[LCD] / FINDER
CAM RESET
EXECUTE / RETURN
BRIGHT
ON SCREEN
OFF / [LCD] / LCD/TV
DATE/TIME
[OFF] / AUTO / ON
TIME CODE
[OFF] / ON
GR-D47AG_07Advanced.fm  Page 17  Monday, February 7, 2005  5:22 PM